HS34HEC
High-Energy Coil
Heavy-Duty Ignition Coil
As much as 45,000 Volts to the Plugs!
HS34HEC High-Energy Coil
More winds of copper wire than other standard-size canister coils
High secondary resistance (10.6K Ohms) sends as much as 45,000 volts to the spark plugs
Heavy-duty, high-energy coil
Standard 56mm X 112mm (2.2 in. X 4.4 in.) canister size - fits stock-sized coil clamp
Primary resistance 3.4 Ohms
Secondary resistance 12K Ohms
Turn ratio 83:1
Primary inductance 8.5 mH
Secondary inductance 33~38 H
Solid, epoxy-filled canister (not oil-filled) for high-vibration environments
Three-way 1/4" brass male connectors on both terminals
Rugged, mirror-polished, non-corrosive case won't chip or peel over time, like chrome-plated coil canisters
International Buyers – Please Note:
Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility.
Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying.
|
3.4 Ohms primary resistance12K Ohms secondary resistance |
||||||||||||
|
High secondary resistance for more voltage at the plugs Ideal for Use with Hot-Spark 4-cyl Electronic Ignition Conversion Kits with red 3-series ignition module |
Heavy-duty, high-energy coil with extra turns of copper wire in the
secondary windings for as much as 45,000 volts to the spark plugs - more turns
of copper wire than other standard-sized canister coils.
Application:
Ideal for 4-cylinder distributors. Provides more primary resistance to protect from
overheating due to high-voltage or high-temperature environments.
Designed specifically to produce maximum spark
when used
with Hot-Spark red electronic ignition conversion kits
(red ignition module). Also excellent for points-based
distributors - high primary resistance helps reduce points burning, pitting.
Epoxy-filled
canister (not oil-filled) to withstand high-vibration
environments
Rugged, mirror-polished case -
won't chip or peel like chrome-plated coil canisters.
Standard 56mm (2.2 in.) coil
diameter - fits stock coil clamps.
In Stock:
Available:
|
|||||||||||
|
||||||||||||
Know the primary resistance needed for your particular application — Please check
with the manufacturer of your HEI/CDI or electronic ignition system to make sure
that this is the correct ignition coil for your application before you buy.
Just a better idea.
© 2005-2011 HotSpark, LLC
