HS07HEC
High-Energy Coil
Heavy-Duty Ignition Coil
As much as 45,000 Volts to the Plugs!
HS07HEC High-Energy Coil
Ideal for use with certain HEI electronic ignition systems or 6-volt points applications
Recommended for use with 4-series Hot-Spark electronic ignition
More winds of copper wire than other standard-size canister coils
High secondary resistance (11K Ohms) sends as much as 45,000 volts to the spark plugs
Heavy-duty, high-energy coil
Standard 56mm X 112mm (2.2 in. X 4.4 in.) canister size - fits stock-sized coil clamp
Primary resistance 0.7 Ohms
Secondary resistance 11K Ohms
Turn ratio 139:1
Primary inductance 2.3 mH
Secondary inductance 33~38 H
Solid, epoxy-filled canister (not oil-filled) for high-vibration environments.
Three-way ¼" brass male connectors on both terminals
Rugged, mirror-polished, stainless steel case won't chip or peel over time, like chrome-plated aluminum coil canisters
Can be used as a 6-volt coil for some applications.
International Buyers – Please Note:
Import duties, taxes and charges are not
included in the item price or shipping charges. These charges are the buyer's
responsibility.
Please check with your country's customs
office to determine what these additional costs will be prior to
bidding/buying.
|
0.7 Ohms primary resistance 11 K Ohms secondary resistance |
||||||||||||
|
Low primary resistance and high secondary resistance for more voltage at the plugs |
Heavy-duty, high-energy coil with extra turns of copper wire in the
secondary windings for as much as 45,000 volts to the spark plugs - more
windings of copper wire than other standard-sized canister coils.
Application:
HEI,
CDI and electronic ignition systems requiring a coil with 0.7
Ohms primary resistance. HEI,
CDI and electronic ignition systems requiring a coil with 0.7
Ohms primary resistance.
Can be used as a 6-volt coil for
many applications.
Epoxy-filled
canister (not oil-filled) to withstand high-vibration
environments
Rugged, mirror-polished stainless steel case -
won't chip or peel like chrome-plated aluminum coil canisters.
Standard 56mm (2.2 in.) coil
diameter - fits stock coil clamps.
3-way brass connectors on each
terminal
In Stock:
Available:
|
|||||||||||
|
||||||||||||
Know the primary resistance needed for your particular application — Please check with the manufacturer of your HEI/CDI or electronic ignition system to make sure that this is the correct ignition coil for your application before you buy.
© 2005-2023 Hot Spark®
